Produktai skirti wangzhou assxzq cn (4)

Tape and reel specification for all CXSM SMD crystals.

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz. Product Series Code TCXO:EMF576D VCTCXO: VEMF576D Frequency Range:12.0MHz to 800.0MHz Output Waveform:LVDS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Standard Frequencies:(Partial list) 12.8, 16.0 19.44, 20.0, 25.0, 27.0, 30.0, 32.0 Frequency Stability (see table) vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change Supply Voltage:+3.3 Volts Differential Output Voltage VOD:247mV min., 355mV typical; 454mV max., Output 1 - Output 2 Differential Output Error dVOD:-50mV min., 50mV max. Output Offset Voltage VOS:1.125V min., 1.200V typ., 1.375V max Offset Magnitude Error dVOS:0mV min., 3.0mV typ., 25mV max Rise and Fall Times:1.5ns typical Duty Cycle:50%±5% Start-up Time:5ms typical, 10ms max. Current Consumption:12MHz to 24MHz: <33mA max., 24MHz to 96MHz: <50mA max., 96MHz to 800MHz:<85mA max Output Load:50W from each load Drive Capability:100W between LVDS and Complementary LVDS Storage Temperature:-55° to +125°C Phase Jitter (RMS) (12kHz to 20MHz):0.4ps typ., 0.5ps max

96SMF and 98SMF, SMD 6 x 3.5mm, ultra-low profile, Monolithic Crystal Filter

AG crystals are ultra-miniature SMD components specifically designed to provide 32.768kHz for real-time clocks. Their ultra-small size and rugged construction make them suitable for a wide range of applications including battery powered, hand-held equipment and any application requiring miniaturization Frequency 32.7680kHz (also 75kHz) Ultra-miniature size 7.0 x 1.5 x 1.4mm SMD Low mass and rugged construction Supplied taped and reeled Suitable for a wide range of real-time clock applications Nominal Frequency:32.7680kHz and 75.0kHz Calibration Tolerance:±20ppm of ±50ppm (standard) Load Capacitance:12.5pF standard or 7pF Equivalent Series Resistance 32.768kHz:65kΩ maximum 75.0kHz:30kΩ maximum Drive Level:1.0µW max, 0.5µW operating Parabolic Coefficient:-0.04ppm/°C2 maximum Peak Temperature:+25°C Shunt Capacitance (C0):0.8pF typical Motional Capacitance (C1):1.9fF typical Ageing:±3ppm /year max. at +25°C Insulation Resistance:500MΩ min. @100VDC Crystal Cut:X-Cut Operating Temperature Range:-40° to +85°C Storage Temperature Range:55°C to +125°C Reflow Soldering:10s max. @+260°C twice or <230°C for 3 minutes RoHS Status:RoHS Compliant, pB free Packaging:16mm EIA tape and reel 3000 pieces per reel